Specifications

Detector
Internal Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75 in.). Radiation symbol on front label marks the center of the detector.
Display
4 digit liquid crystal display with indicators.
Averaging Periods
Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases

Gamma Sensitivity 3340 CPM/mR/hr referenced to Cs-137. Smallest detectable level for I-125 is .02 µCi at contact. Timer can set 1 minute sampling periods from 1 to 10 minutes. Operating Range mR/hr - .001 (1µR) to 100 mR/hr CPM - 0 to 350,000 µSv/hr - .01 to 1000 CPS - 0 to 5000 Total/ Timer - 1 to 9,999,000 counts Accuracy mR/hr ±10% typical (NIST), ±15% max - 0 to 100 µSv/hr ±10% typical (NIST), ±15% max - 01 - 1000 CPM ±10% typical (NIST), ±15% max - 0 to 350,000 (Referenced to Cs-137)

Energy Sensitivity Detects Alpha down to 2 MeV.Detects Beta down to .16 MeV; typical detection efficiency at 1 MeV is approx. 25%. Detects Gamma down to 10 KeV trough the end window. Alert Set Range mR/hr .001 - 50 and CPM 1 - 160,000. 70db @ 1m. Count Light Red LED flashes with each radiation event. Audio Indicator Internally mounted beeper (can be switched off for silent operation) Outputs Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration Anti-Saturation Meter will hold at full scale in fields as high as 100 times the maximum reading. Power Requirements One 9-volt alkaline battery. Battery life is approx. 2160 hours at normal background. Temperature Range -10ºC to 50ºC (14ºF to 122ºF) Weight Inspector: 275 grams (9.7 oz.) without battery. Size 150 x 80 x 30 mm (5.9 x 3.3 x 1.2 in.). Includes Carrying Case, CE Certification Warranty 1 year limited, 90 day Warranty on GM Detector

Utility Menu The Utility Menu offers several options accessible by holding down the + button while turning the instrument on. • 3 second (fast response) • Switches from mR/hr and CPM to µSv/hr and CPS • Reset the cal factor to 100. • Adjust the CAL factor. • Reset all setting to default factory setting.

Back of Unit

Accessories

Xtreme Boot	Waterproof Case	Observer Software	Stand	Wipe Test Plate

Support

Operation Manuals (PDF) English Spanish French | Waterproof Case Instructions | Responder Knowledge Base | Powerpoint Training | Quick Specs