|
|
Inspector
EXP+ Handheld Digital Radiation Alert®
Detector |
a
ß y
x |
The Inspector EXP was designed to meet the requirements of emergency response personnel. It has
the same valuable features, small size, and quality of the Inspector. However, instead of the built-in
detector, it has the added versatility of an external probe. The carrying case has a clear window panel
providing full view of the readout, count light, access to the switches, and a convenient belt loop for
carrying the instrument. A small pocket is provided for
a check source. The protective probe cover on the
uniquely designed carrying case folds easily out of the
way to allow one-handed operation if desired.
Specifications
Detector
RAP-RS1 Probe - External Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0
mg/cm2 areal density. Effective diameter of window
is 45 mm (1.75 in.). Radiation symbol on front label
marks the center of the detector. |
 |
 |
Display
4 digit liquid crystal display with indicators.
Averaging Periods
Display will update every 3 seconds. At
low background levels, the update is the
moving average for the past 30-second
time period. The timed period for the
moving average decreases as the radiation
level increases
Alert Set
Range
mR/hr .001 - 50 and CPM 1 - 160,000.
70db @ 1m.
Count Light
Red LED flashes with each radiation event.
Audio Indicator
Internally mounted beeper (can be switched
off for silent operation)
Outputs
Dual miniature jack drives CMOS or TTL
devices: count to computer or datalogger.
Submini jack input allows for electronic
calibration |
|
| Energy Sensitivity
Detects Alpha down to 2 MeV.Detects Beta down to .16 MeV; typical detection efficiency at 1 MeV is approx. 25%. Detects Gamma down to 10 KeV through the end window.
Anti-Saturation
Meter will hold at full scale in fields as high
as 100 times the maximum reading.
Power Requirements
One 9-volt alkaline battery. Battery life is approx.
2160 hours at normal background.
Temperature Range
-10º to 50ºC (14º to 122ºF)
Weight
Inspector: 6.3 oz. (181 g)
Probe - Approx. 11.5 oz. (328 g) w/o cable
Size
150 x 80 x 30 mm (5.9 x 3.1 x 1.2 in.)
Probe: 260 X 70 X 38 mm (10.25 X 2.75 X 1.5 in)
Probe Construction
Anodized aluminum housing
Size - Approx. 8.75 in. (22.23 cm) Dia.: 2.75 in. (7.0 cm)
Connector - Amphenol-Tucal
Handle - Black foam grip
|
 |
 |
Gamma
Sensitivity
3340 CPM/mR/hr referenced to Cs137. Smallest
detectable level for I-125 is .02 µCi
at contact. Timer can set 1 minute sampling
periods from 1 to 10 minutes. |
Operating
Range |
mR/hr - .001 (1µR)
to 100 mR/hr |
CPM - 0 to 350,000 |
µSv/hr - .01 to 1000 |
CPS - 0 to 5000 |
Total/ Timer - 1 to 9,999,000
counts |
Accuracy
mR/hr ±10% typical (NIST), ±15%
max - 0 to 100
µSv/hr ±10%
typical (NIST), ±15% max - .01 -
1000
CPM ±10% typical (NIST), ±15%
max - 0 to 350,000
(Referenced to Cs137) |
|
Includes
Carrying Case, Cable for Inspector+ EXP: Beldon 9853 with Binder 31226 twinax. CE Certification.
Limited Warranty
1 year Limited Warranty, 90 day Limited Warranty on GM detector |
Utility Menu
The Utility Menu offers several options accessible
by holding down the + button while turning the
instrument on.
• 3 second (fast response)
• Switches from mR/hr and CPM to µSv/hr
and CPS
• Reset the cal factor to 100.
• Adjust the CAL factor.
• Reset all setting to default factory
setting. |
Support
Operation Manuals (PDF) English Spanish French| Responder
Knowledge Base | Inspector
Training Powerpoint| Quick
Specs |
|
| |
S.E. International, Inc.
P.O. Box 39, 436 Farm Rd. Summertown, TN 38483
1.800.293.5759 | 931.964.3561 | Fax: 1.931.964.3564
www.seintl.com | radiationinfo@seintl.com |
|
|
RADIATION
ALERT® Quality Handheld
Radiation Detectors, Gieger Counter, & Radiation Spectrum Analyzers are engineered
to be reliable,
simple to use, affordable and made
in the USA. For ordering and pricing,
Call 1-800-293-5759.
Inspector, Monitor 4, and Abacus are trademarks owned by S.E. International, Inc.
|
|
|
