How do I use the utility menu to change the settings on the SEI Inspector?

The Utility Menu allows the user to change default settings for several operating parameters. Once a setting is changed, it remains in effect unless they are changed through the Utility Menu.
1. To activate the Utility Menu, hold down the “+” button while turning the instrument on. The display will show the “MENU” icon. Release the “+” button and a “1” indicating option 1 will appear along with the “Menu” icon.

2. Scroll through the menu by pushing the “+” or “-” buttons.

3. To select an option, push the “Set” button and the “SET” icon is displayed.

4. Use the “+” or “-” buttons to toggle between choices and press the “Set” button to enter the new value. The instrument will continue to operate in the Utility Menu mode, and the display will show “0” and “MENU”. To adjust another Utility Menu option, repeat the above steps.

5. To exit the Utility Menu at any time, press the SET button again. The Inspector continues with the normal start-up routine.

Options Function Comments
___________________________________________________________________________________________
1 Auto Averaging or 3 sec. Averaging “ON” selects Auto Averaging
“OFF” selects 3 second (fast response) averaging
Refer to “Response Time (Autoaveraging)” in the
operation manual
___________________________________________________________________________________________
2 Units of Measurement Selects between mR/hr and CPM or μSv and CPS
___________________________________________________________________________________________
3 Cal 100 Reset Automatically resets Cal factor to 100 Press the set Button
No toggling required
___________________________________________________________________________________________
4-6
___________________________________________________________________________________________
7 Cal Factor Adjust Manually adjusts cal factor Use “+” or “-”
Buttons to increase
or decrease the
value
___________________________________________________________________________________________
8 Factory Default Reset Automatically resets to Auto Averaging, mR/hr, CPM, and CAL 100 Press the set Button
No toggling required
9 Revision #

 

Comment on this FAQ

Your email address will not be published. Required fields are marked *