How do I install the Area Monitor?
Area Monitor Base Unit Installation Dimensions The Area Monitor has six convenient mounting holes for wall installation. Before mounting the Area Monitor to the wall, make sure that the 6 ft. power converter cord will reach the nearest power outlet. (50/60Hz 120V/240V AC outlet) Area Monitor Remote Alarm Installation Dimensions The Area Monitor Remote Alarm […]
what is the Detector Efficiency for Cs-137 and All Built-In Isotopes for the Ranger
Radiation Alert Ranger – Detector Efficiency Statement for Cs-137 and All Built-In Isotopes S.E. International, Inc. (SEI) is the original equipment manufacturer (OEM) of the Radiation Alert Ranger, a hand-held GM-based radiation detection instrument. This document provides the factory-programmed detector efficiency values for the Ranger, explains the measurement geometry under which those values were determined, […]
Is the battery for the Area Monitor PA built into the unit, or is it an external battery that must be purchased and installed separately?
Battery / Backup Power The Area Monitor PA has an internal backup battery. No external battery is required.
What is the battery model/type, for the Area Monitor, and can it be replaced in the field by hospital technical staff?
Backup Power The battery is a 6-volt, 4.5 Ah sealed lead-acid battery. The battery can be replaced in the field by hospital technical staff.
Can the Area Monitor PA can drive an external “remote alarm” device?
The Area Monitor PA provides relay outputs to drive one external remote alarm device. S.E. International offers a compatible remote alarm with a visual strobe and optional audible alert. The remote alarm can be purchased separately as part of the Area Monitor PA accessory options. Customer-supplied alarms or annunciators may also be used via the […]
Can the remote alarm device be integrated with a bunker door switch?
Door Interlock / Alarm Logic The system can be integrated with a bunker door switch using the relay outputs through the DB-9 connector.
Is the Area Monitor a product intended to remain on the market for the long term?
The Area Monitor PA is a current, actively supported product. A newer version is planned for release in the coming year and will maintain compatibility while adding additional features. Long-term service, repair, and support are available.
Is the Area Monitor PA suitable for clinical Use?
The Area Monitor PA is well suited for: LINAC rooms (photon and electron beams) HDR brachytherapy rooms (Ir-192) Radiation presence indication only
Can you buy the Area Monitor Remote Alram separately?
Yes
Who should use the Radiation Alert Ranger®?
It is ideal for professionals in industrial safety, laboratories, environmental monitoring, emergency response, and health physics.